Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-25
85.1.1.2 63.56.1.1 0 Vlan-interface561 Down
Table 3-10 Description of the fields of the display ospf peer brief command
Field Description
Router ID Router ID of neighbor router
Address
Address of the interface through which the neighbor router
communicates with the local router
Pri Priority
Interface Interface address of the network segment
State State information
3.1.23 display ospf request-queue
Syntax
display ospf [ process-id ] request-queue
View
Any view
Parameter
process-id: ID of an OSPF process. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf request-queue command to view the information about the
OSPF request-queue.
Example
# Display the information of OSPF request-queue.
<Quidway> display ospf request-queue
The Router's Neighbors is
RouterID: 1.1.1.1 Address: 1.1.1.1
Interface: 1.1.1.3 Area: 0.0.0.0
LSID:1.1.1.3 AdvRouter:1.1.1.3 Sequence:80000017 Age:35

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English