Huawei Quidway S8500 Series - Xbar

Command Manual – Reliability
Quidway S8500 Series Routing Switches Chapter 2
HA Configuration Commands
Huawei Technologies Proprietary
2-5
Example
# Synchronize the configuration file between the master and slave boards.
<Quidway> slave update configuration
2.1.8 xbar
Syntax
xbar [ load-balance | load-single ]
View
System view
Parameter
load-balance: Sets Xbar load balance mode.
load-single: Sets Xbar load single mode.
Description
Use the xbar command to configure the load mode of the master/slave board.
By default, the master and slave boards are both in load single mode.
Caution:
When a single SRPU is in position, the load-balance mode is not effective and the
SRPU changes to the load-single mode automatically.
Example
# Configure the system Xbar load mode.
[Quidway] xbar load-balance