Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches
Chapter 2 Ethernet Link Aggregation Configuration
Commands
Huawei Technologies Proprietary
2-13
System View: return to User View with Ctrl+Z.
[Quidway] link-aggregation group 22 mode manual
2.1.15 port link-aggregation group
Syntax
port link-aggregation group agg-id
undo port link-aggregation group
View
Ethernet port view
Parameter
agg-id: Aggregation group ID, in the range of 1 to 920. IDs 1 though 31 indicate manual
or static aggregation groups; IDs 32 through 64 are reserved; IDs 65 though 192
indicate Routed Trunks; IDs 193 through 920 indicate dynamic aggregation groups.
Description
Use the port link-aggregation group command to add an Ethernet port into a manual
or static aggregation group. Use the undo port link-aggregation group command to
delete an Ethernet port from an aggregation group.
Related command: display link-aggregation verbose.
When a port is added into an aggregation group, the original ARP information of the
port will be lost.
Example
# Add Ethernet2/1/1 into aggregation group 22.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet2/1/1
[Quidway-Ethernet2/1/1] port link-aggregation group 22
2.1.16 reset lacp statistics
Syntax
reset lacp statistics [ interface interface-type interface-number [ to interface-type
interface-number ] ]
View
System view

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English