Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches
Chapter 2 Ethernet Link Aggregation Configuration
Commands
Huawei Technologies Proprietary
2-14
Parameter
interface interface-type interface-number [ to interface-type interface-number ]:
Specifies a port or ports. The command without the parameter to specifies one port,
while the command with the parameter to specifies several contiguous ports.
interface-type indicates port type. interface-number indicates port number. For more
information, refer to the parameter description of the interface command.
Description
Use the reset lacp statistics command to clear LACP statistics for the port. If you do
not specify a port, the command clears LACP statistics for all the ports.
Related command: display link-aggregation interface.
Example
# Clear LACP statistics for all Ethernet ports.
<Quidway> reset lacp statistics

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English