Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-36
Description
Use the peer description command to configure the description information of the
peer/peer group.
Use the undo peer description command to cancel the description information of the
peer/peer group.
By default, description information of peers/peer group is not configured.
Related command: display current-configuration, display bgp routing-table peer,
display bgp routing-table group.
Example
# Configure the description information of the peer whose name is group1 as beijing1.
[Quidway-bgp] peer group1 description beijing1
5.1.40 peer ebgp-max-hop
Syntax
peer group-name ebgp-max-hop [ ttl ]
undo peer group-name ebgp-max-hop
View
BGP view
Parameter
group-name: Specifies the name of the peer group.
ttl: Maximum hop value. The range is 1 to 255. By default, the value is 64.
Description
Use the peer ebgp-max-hop command to allow the router to establish EBGP
connection with the peer on indirectly connected network.
Use the undo peer ebgp-max-hop command to cancel the existing configuration.
By default, this feature is disabled.
Example
# Allow the router to establish EBGP connection with the peer group named test
indirectly connected.
[Quidway-bgp] peer test ebgp-max-hop

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English