Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches
Chapter 2 Ethernet Link Aggregation Configuration
Commands
Huawei Technologies Proprietary
2-10
[Quidway-Ethernet1/1/1] lacp port-priority 64
2.1.11 lacp system-priority
Syntax
lacp system-priority system-priority-value
undo lacp system-priority
View
System view
Parameter
system-priority-value: System priority, in the range of 0 to 65,535. By default, it is
32,768.
Description
Use the lacp system-priority command to configure system priority.
Use the undo lacp system-priority command to restore the default system priority.
Related command: display lacp system-id.
Example
# Set system priority to 64.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] lacp system-priority 64
2.1.12 link-aggregation
Syntax
link-aggregation interface-name1 to interface-name2 [ both ]
View
System view
Parameter
interface-name1: Starting range value of Ethernet port joined the Ethernet link
aggregation.
interface-name2: Last range value of Ethernet port joined the Ethernet link
aggregation.
both: Specifies the aggregation group to balance load for inbound and outbound
packets.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English