Huawei Quidway S8500 Series - Debugging Msdp; Display Msdp Brief

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 6 MSDP Configuration Commands
Huawei Technologies Proprietary
6-2
6.1.2 debugging msdp
Syntax
debugging msdp { all | connect | event | packet | source-active }
undo debugging msdp { all | connect | event | packet | source-active }
View
User view
Parameter
all: All the debugging information of MSDP.
connect: Debugging information of MSDP peer connection reset.
event: Debugging information of MSDP event.
packet: Debugging information of MSDP packet.
source-active: Debugging information of active MSDP source.
Description
Use the debugging msdp command to enable MSDP debugging functions.
Use the undo debugging msdp command to disable MSDP debugging functions.
By default, MSDP debugging functions are disabled.
Example
# Enable all common MSDP debugging functions.
<Quidway> debugging msdp all
6.1.3 display msdp brief
Syntax
display msdp brief
View
Any view
Parameter
None
Description
Use the display msdp brief command to view the state of MSDP peer.