Huawei Quidway S8500 Series - Chapter 4 RPR Port Configuration Commands; RPR Port Configuration Commands; Clock-Source; Debugging Rpr

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 4 RPR Port Configuration Commands
Huawei Technologies Proprietary
4-1
Chapter 4 RPR Port Configuration Commands
4.1 RPR Port Configuration Commands
4.1.1 clock-source
Syntax
clock-source [ line | internal ]
undo clock-source
View
RPR POS physical port view
Parameter
line: Specifies the clock source as line.
internal: Specifies the clock source as internal. By default, it is internal.
Description
Use the clock-source command to configure clock source.
Use the undo clock-source command to restore the default setting.
Example
# Set clock source.
<Quidway> system-view
[Quidway] interface RPR2/1/1.1
[Quidway- RPR2/1/1.1]clock-source line
4.1.2 debugging rpr
Syntax
debugging rpr { all | topology | protection | controlframe | mac | ringselection |
tp-frame }
undo debugging rpr { all | topology | protection | controlframe | mac |
ringselection | tp-frame }
View
User view