Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-23
Use the undo accounting optional command to disable the RADIUS accounting
option.
By default, selection of RADIUS accounting option is disabled.
If no RADIUS server is available or if RADIUS accounting server fails when the
accounting optional is configured, the user can still use the network resource,
otherwise, the user will be disconnected.
The user configured with accounting optional command in RADIUS scheme will no
longer send real-time accounting update packet or stop accounting packet.
The accounting optional command in RADIUS scheme view is only effective on the
accounting that uses this RADIUS scheme.
Example
# Enable the selection of RADIUS accounting of the RADIUS scheme named as
CAMS.
[Quidway-radius-cams] accounting optional
2.2.2 data-flow-format
Syntax
data-flow-format data { byte | giga-byte | kilo-byte | mega-byte } packet { giga-byte
| kilo-byte | mega-byte | one-packet }
undo data-flow-format
View
RADIUS scheme view
Parameter
data: Sets data unit.
byte: Sets 'byte' as the unit of data flow.
giga-byte: Sets 'giga-byte' as the unit of data flow.
kilo-byte: Sets 'kilo-byte' as the unit of data flow.
mega-byte: Sets 'mega-byte' as the unit of data flow.
packet: Sets data packet unit.
giga-packet: Sets 'giga-packet' as the unit of packet flow.
kilo-packet: Sets 'kilo-packet' as the unit of packet flow.
mega-packet: Sets 'mega-packet' as the unit of packet flow.
one-packet: Sets 'one-packet' as the unit of packet flow.
To Next Page
Loading...
Need help?
General