Huawei Quidway S8500 Series - Chapter 6 Port Isolation Configuration Commands; Port Isolation Configuration Commands; Port-Isolate Group; Port-Isolate Uplink-Port Group

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 6 Port Isolation Configuration Commands
Huawei Technologies Proprietary
6-1
Chapter 6 Port Isolation Configuration Commands
6.1 Port Isolation Configuration Commands
6.1.1 port-isolate group
Syntax
port-isolate group isolate-group-id
undo port-isolate group isolate-group-id
View
System view
Parameter
isolate-group-id: Isolated group number, ranging from 1 to 64. The system supports 64
isolated groups.
Description
Use the port-isolate group command in system view to create an isolated group.
Use the undo port-isolate group isolate-group-id in system view to delete an isolated
group. If you delete the isolated group, all ports in the isolated group exit from the
group.
Example
# Create isolated group 1.
<Quidway> system-view
[Quidway] port-isolate group 1
6.1.2 port-isolate uplink-port group
Syntax
port-isolate uplink-port group isolate-group-id
undo port-isolate uplink-port group isolate-group-id
View
Ethernet port view/RPR port view