Huawei Quidway S8500 Series - Group; Import-Route

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-29
5.1.29 group
Syntax
group group-name [ internal | external ]
undo group group-name
View
BGP view
Parameter
group-name: Specifies the name of the peer group. It can consist of numbers or letters
with a length ranging from 1 to 47. group-name is locally significant.
internal: Specifies the type of the peer group as IBGP.
external: Specifies the type of the peer group as EBGP, including other groups of other
sub-ASs in the confederation.
Description
Use the group group-name command to establish a peer group.
Use the undo group group-name command to cancel the configured peer group.
The default type of BGP peer group is internal.
Rather than existing alone, a BGP peer must belong to a peer group. Therefore, when
creating a BGP peer, you must create a BGP peer group first and then add the peer into
the group.
All member peers must use the same update policy as the peer group, but they may
use different ingress policies.
Example
# Create an IBGP group named test.
[Quidway-bgp] group test
5.1.30 import-route
Syntax
import-route protocol [ med med-value | route-policy route-policy-name ]
undo import-route protocol
View
BGP view