Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches Chapter 1
NAT Configuration Commands
Huawei Technologies Proprietary
1-1
Chapter 1 NAT Configuration Commands
 Note:
The service processor cards mentioned here refer to LSBM1NATB boards.
1.1 NAT Configuration Commands
1.1.1 display nat address-group
Syntax
display nat address-group
View
Any view
Parameter
None
Description
Use the display nat address-group command to display the configuration of the
address pool.
Example
# Display the configuration of the address pool.
<Quidway> display nat address-group
NAT address-group information:
0 : from 1.1.1.1 to 1.1.1.2
1 : from 2.2.2.2 to 2.2.2.3 slot 3
1.1.2 display nat aging-time
Syntax
display nat aging-time
View
Any view