Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 1 Static Route Configuration Commands
Huawei Technologies Proprietary
1-2
Destination/Mask Protocol Pre Cost Nexthop Interface
1.1.1.0/24 DIRECT 0 0 1.1.1.1 Vlan-interface1
1.1.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
2.2.2.0/24 DIRECT 0 0 2.2.2.1 Vlan-interface2
2.2.2.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
3.3.3.0/24 DIRECT 0 0 3.3.3.1 Vlan-interface3
3.3.3.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
4.4.4.0/24 DIRECT 0 0 4.4.4.1 Vlan-interface4
4.4.4.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
127.0.0.0/8 DIRECT 0 0 127.0.0.1 InLoopBack0
127.0.0.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
Table 1-1 Description of the fields of the display ip routing-table command
Field Description
Destination/Mask Destination address/Mask length
Protocol Routing protocol
Pre Routing preference
Cost Cost
Nexthop Next hop address
Interface
Output interface, through which the data packet destined
for the destination network segment is sent
1.1.2 display ip routing-table acl
Syntax
display ip routing-table acl { acl-number | acl-name } [ verbose ]
View
Any view
Parameter
acl-number: The number of basic ACL, ranging from 2000 to 2999.
acl-name: The basic ACL name introduced via names.
verbose: With the parameter, this command displays the verbose information of both
the Active and Inactive routes that passed filtering rules. Without the parameter, this
command only displays the summary of the Active routes that passed filtering rules.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English