Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 1 Static Route Configuration Commands
Huawei Technologies Proprietary
1-13
Table 1-3 Description of the fields of the display ip routing-table radix command
Field Description
INET Address suite
inodes Number of nodes
routes Number of routes
1.1.8 display ip routing-table statistics
Syntax
display ip routing-table statistics
View
Any view
Parameter
None
Description
Use the display ip routing-table statistics command to view the integrated routing
information.
The integrated routing information includes total route amount, the route amount added
or deleted by protocol, amount of the routes that are labeled “Deleted” but not deleted,
and the Active route amount.
Example
# Display the integrated route information.
<Quidway> display ip routing-table statistics
Routing tables:
Proto route active added deleted
DIRECT 24 4 25 1
STATIC 4 1 4 0
BGP 0 0 0 0
RIP 0 0 0 0
IS-IS 0 0 0 0
OSPF 0 0 0 0
O_ASE 0 0 0 0
O_NSSA 0 0 0 0
AGGRE 0 0 0 0
Total 28 5 29 1