Huawei Quidway S8500 Series - Chapter 6 RMON Configuration Commands

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 6 RMON Configuration Commands
Huawei Technologies Proprietary
6-1
Chapter 6 RMON Configuration Commands
6.1 RMON Configuration Commands
6.1.1 display rmon alarm
Syntax
display rmon alarm [ alarm-table-entry ]
View
Any view
Parameter
alarm-table-entry: Alarm table entry index.
Description
Use the display rmon alarm command to view RMON alarm information.
Related command: rmon alarm.
Example
# Display the RMON alarm information.
<Quidway> display rmon alarm
Alarm table 1 owned by monitor is VALID.
Samples type : delta
Variable formula : 1.3.6.1.2.1.16.1.1.1.3.1<etherStatsDropEvents.1>
Description : Ethernet5/1/1
Sampling interval : 10(sec)
Rising threshold : 10(linked with event 1)
Falling threshold : 2(linked with event 1)
When startup enables : risingOrFallingAlarm
Latest value : 0
Table 6-1 Description on the fields of the display rmon alarm command
Field Description
Alarm table 1 Index 1 in alarm table
monitor Owner
VALID The alarm entry corresponding to this index is valid.
Samples type Type of sampling