Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-3
interface-list: Destination port list, interface-list = interface-type interface-number [ to
interface-type interface-number ] &<1-10>. &<1-10> indicates that the former
parameter can be input 10 times repeatedly at most.
agg-id: Source or destination aggregation group ID. If it is a source aggregation group,
the port with minimum port number is the source port; if it is a destination aggregation
group, the configurations of all its member ports change to be consistent with that of the
source.
Description
Use the copy configuration command to copy the configuration of a specific port to
other ports, to ensure consistent configuration.
Example
# Copy the configuration of aggregation group 1 to aggregation group 2.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] copy configuration source aggregation-group 1 destination
aggregation-group 2
1.1.3 description
Syntax
description text
undo description
View
Ethernet port view
Parameter
text: Port description character string, with 64 characters at most.
Description
Use the description command to configure the description character string for
Ethernet port.
Use the undo description command to cancel the port description character string.
By default, the port description character string is null.
Example
# Configure the description character string of Ethernet port Ethernet2/1/1 as
lanswitch-interface.
<Quidway> system-view
To Next Page
Loading...
Need help?
General