Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 5 SNMP Configuration Commands
Huawei Technologies Proprietary
5-21
SNMP engineID (for authentication) is required when configuring remote user for an
agent. This command will not be effective without engineID configured.
For V1 and V2C, this command will add a new community name. For V3, it will add a
new user for an SNMP group.
Example
# Add a user wang for huawei (an SNMP group), configures to authenticate with MD5
and sets authentication password as pass.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] snmp-agent usm-user v3 wang huawei authentication-mode md5 pass
5.1.21 undo snmp-agent
Syntax
undo snmp-agent
View
System view
Parameter
None
Description
Use the undo snmp-agent command to disable all versions of SNMP running on the
server.
Perform any command of snmp-agent will enable SNMP Agent.
Example
# Disable the running SNMP agents of all SNMP versions.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] undo snmp-agent

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English