Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches Chapter 1 ACL Commands
Huawei Technologies Proprietary
1-5
View
Any view
Parameter
all: Displays all the ACLs that have been applied (including the number-identified ones
and name-identified ones)
interface interface-type interface-number: The port of the switch. Refer to the
description in the Port Module Command Manual for details. The ACL application
information on the specified port of a normal card displays when the parameter is
specified.
vlan: Displays the ACL application information under the VLAN configured through the
service process card.
vlan-id: the ID of the VLAN, in the range of 1-4094.
Description
Use the display acl running-packet-filter command to display the ACL application
information, including the name of the ACL, the name of the sub items and the
application state.
Example
# Display the ACL application information of port Ethernet3/1/1.
<Quidway> display acl running-packet-filter ethernet3/1/1
Ethernet3/1/1
Inbound:
Acl 4000 rule 0 running
# Display the ACL application information of VLAN2
<Quidway> display acl running-packet-filter vlan 2
Vlan 2
Inbound:
Acl 2000 rule 1 slot 6 running
1.1.5 display flow-temlate
Syntax
display flow-template [ default | interface interface-type interface-number | slot
slotid | user-defined ]
View
Any view
To Next Page
Loading...
