Huawei Quidway S8500 Series User Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 1 MPLS Basic Configuration Commands
Huawei Technologies Proprietary
1-12
<Quidway> debugging mpls ldp all
1.2.2 display mpls ldp
Syntax
display mpls ldp
View
Any view
Parameter
None
Description
Use the display mpls ldp command to display LDP and LSR information.
By default, it displays information of LDP and LSR.
Related command: mpls ldp, mpls ldp hops-count, mpls ldp loop-detection and
mpls ldp path-vectors.
Example
# Display LDP and LSR information.
<Quidway> display mpls ldp
Label Distribution Protocol: V1
LSR ID: 10.10.10.10 LSR Status: Active
Loop Detection: Disabled.
Path Vector Limit: 32 Hop Count Limit: 32
DU Readvertisement: On Request Retry: Off
Label Retention Mode: Liberal DU Explicit Request: Off
Label Distribution Control Mode: Ordered.
1.2.3 display mpls ldp buffer-info
Syntax
display mpls ldp buffer-info
View
Any view
Parameter
None

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English