Huawei Quidway S8500 Series - Page 723

Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 1 MPLS Basic Configuration Commands
Huawei Technologies Proprietary
1-13
Description
Use the display mpls ldp buffer-info command to view the LDP buffer information.
Example
# Display the LDP buffer information.
<Quidway> display mpls ldp buffer-info
---------------------------------------------------------------
Buffer-Name Buffer-ID Buffer-Size Total-Count Free-Count
---------------------------------------------------------------
ENTITY 0 292 199 195
LOCAL-IF 1 36 200 196
PEER-IF 2 40 201 195
PDU 3 204 249 249
ADJACENCY 4 56 201 198
PEER-INF 5 116 201 198
SESSION 6 176 201 198
US-BLK 7 264 1052 1028
DS-BLK 8 240 1052 1042
FEC 9 40 1042 1032
US-LIST 10 16 1052 1028
TRIG-BLK 11 56 2076 2071
LABEL-RANGE 12 20 198 198
CR-TUNNEL 13 124 128 128
ER-HOP 14 40 4096 4096
IF-MSG 15 24 9999 9999
-----------------------------------------------------------------
Buffer no error.
1.2.4 display mpls ldp interface
Syntax
display mpls ldp interface [ | begin text | exclude text | include text ]
View
Any view
Parameter
|: Displays matched outputs.
begin: Displays the outputs matching the regular expression from the first line.
exclude: Displays the outputs excluding those lines matching the regular expression.
include: Displays only those outputs matching the regular expression.