Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-26
Table 3-11 Description of the fields of the display ospf request-queue command
Field Description
RouterID Router ID of neighbor router
Address
Address of the interface, through which neighbor routers
communicate with the router
Interface Address of the interface on the network segment
Area Number of an OSPF area
LSID:1.1.1.3 Link State ID of the LSA
AdvRouter Router ID of the router originating the LSA
Sequence
Sequence number of the LSA, used to discover old and repeated
LSAs
Age Age in seconds of the LSA
3.1.24 display ospf retrans-queue
Syntax
display ospf [ process-id ] retrans-queue
View
Any view
Parameter
process-id: ID of an OSPF process. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf retrans-queue command to view information about the OSPF
retransmission queue.
Example
# Display information about the OSPF retransmission queue.
<Quidway> display ospf retrans-queue
OSPF Process 200 with Router ID 103.160.1.1
Retransmit List
The Router's Neighbors is
RouterID: 162.162.162.162 Address: 103.169.2.2
Interface: 103.169.2.5 Area: 0.0.0.1
Retrans list:
Type: ASE LSID:129.11.77.0 AdvRouter:103.160.1.1

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English