Huawei Quidway S8500 Series User Manual

Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-13
2.1.12 local-user
Syntax
local-user { username | multicast [ domain domain-name ] ipaddress |
password-display-mode { auto | cipher-force } }
undo local-user { username | all [ service-type { ftp | lan-access | telnet | ppp | ssh
| terminal } ] | multicast [ domain domain-name ] ipaddress |
password-display-mode }
View
System view
Parameter
username : Name of the user.
all [ service-type { ftp | lan-access | telnet | ppp | ssh | terminal } ]: Deletes all local
users. ftp means deleting all local FTP users, lan-access means deleting all local
Lan-access users, telnet means deleting all local Telnet users, ppp means deleting all
local PPP views, ssh means deleting all local SSH views, and terminal means deleting
all the terminals.
all: All users.
multicast [ domain domain-name ]: Add or delete multicast addresses according to
the domain.
ipaddress: IP address of multicast.
password-display-mode { auto | cipher-force }: Specifies the password display
mode. auto means displaying the password in user-specified mode; cipher-force
means displaying password in cipher text by force.
Description
Use the local-user command to configure a local user and enter the local user view.
Use the undo local-user command to cancel a specified local user.
By default, the user database of the system is empty. If the client user wants to access
FTP Server through FTP, this configuration is required.
Related commands: display local-user, service-type.
Example
# Add a local user named huawei1.
<Quidway> system-view
[Quidway] local-user huawei1
[Quidway-luser-huawei1]

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English