Huawei Quidway S8500 Series - L2 Binding Vsi

Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches Chapter 3
VPLS Configuration Commands
Huawei Technologies Proprietary
3-6
Example
# View the configuration information about the VPLS instance Huawei.
[Quidway] display vsi Huawei
VPLS-Instance : Huawei
VSI service status : Open
Vsi ID : 100
Vpn ID : 1
MTU : 1500
Description : none
VPLS Peers : 2
3.3.3.3 npe
7.7.7.7 npe
Interface :
Vlan-interface101
Bandwidth: 102400kbps
Broadcast-restrain: 5%
Qos-class : 0
Qos-table : [0 0 0 1 1 1 1 2]
Mac-table limit : 128
3.1.8 l2 binding vsi
Syntax
l2 binding vsi vsi-name [ encapsulation { vlan | ethernet } ]
undo l2 binding vsi vsi-name [ encapsulation { vlan | ethernet } ]
View
VLAN interface view
Parameter
vsi-name: Name of a VPLS instance.
encapsulation: Specifies the user access encapsulation mode. By default, the mode is
Ethernet.
ethernet: Specifies the user access encapsulation mode as Ethernet.
vlan: Specifies the user access encapsulation mode as VLAN.
Description
Use the l2 binding vsi command to bind a VPLS instance to a VLAN interface. The
services provided by the VLAN will be regarded as the VPN internal services of the
specified VSI.