Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-9
Field Description
VLAN ID VLAN that the user belongs to
IP address IP address of the user
MAC address MAC address of the user
2.1.8 domain
Syntax
domain { isp-name | default { disable | enable isp-name } }
undo domain isp-name
View
System view
Parameter
isp-name: Specifies an ISP domain name. The name is expressed with a character
string not exceeding 24 characters, excluding “/”, “: ”, “*”, “? ”, “<”, and “>”.
default enable isp-name: Enables the default ISP domain specified by isp-name.
default disable: Disables the configuration of the default ISP. Restores the default ISP
domain to “system”.
Description
Use the domain command to configure an ISP domain or enter the view of an existing
ISP domain.
Use the undo domain command to cancel a specified ISP domain.
By default, a domain named as system has been created in the system. The attributes
of system are all default values.
ISP domain is a group of users belonging to the same ISP. Generally, for a username in
the userid@isp-name format, taking gw20010608@huawei163.net as an example, the
isp-name (i.e.huawei163.net) following the @ is the ISP domain name. When Quidway
Series Switches control user access, as for an ISP user whose username is in
userid@isp-name format, the system will take userid part as username for identification
and take isp-name part as domain name.
The purpose of introducing ISP domain settings is to support the application
environment with several ISP domains. In this case, an access device may have
supplicants from different ISP domains. Because the attributes of ISP users, such as
username and password structures, service types, may be different, it is necessary to
separate them by setting ISP domains. In ISP domain view, you can configure a
To Next Page
Loading...
