Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
Chapter 7 MBGP Multicast Extension
Configuration Commands
Huawei Technologies Proprietary
7-20
Example
# Configure the peer group test to use ACL 2000 to filter the received routes.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] bgp 100
[Quidway-bgp] ipv4-family multicast
[Quidway-bgp-af-mul] peer test filter-policy 2000 import
7.1.29 peer group
Syntax
peer peer-address group group-name
undo peer peer-address
View
IPv4 multicast sub-address family view
Parameter
peer-address: IP address of the peer, in dotted decimal format.
group-name: Name of the peer, consisting of one to 47 alphanumeric characters.
Description
Use the peer group command to add a peer into a peer group.
Use the undo peer group command to delete the peer.
Caution:
You must firstly add the specific peer in the peer group in BGP view and enable the
peer group in IPv4 multicast sub-address family view before you can this command.
Example
# Add peer 10.1.1.1 to EBGP peer group TEST.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] bgp 100
[Quidway-bgp] group TEST
[Quidway-bgp] peer TEST as-number 2004

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English