Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 7 IP Performance Configuration Commands
Huawei Technologies Proprietary
7-7
Field Description
time exceeded Number of packets that exceeds the time
7.1.8 display ip socket
Syntax
display ip socket [ socktype sock-type ] [ task-id socket-id ]
View
Any view
Parameter
sock-type: The type of a socket (tcp:1, udp: 2, raw ip: 3).
task-id: The ID of a task, with the value ranging from 1 to 100.
socket-id: The ID of a socket, with the value ranging from 0 to 3072.
Description
Use the display ip socket command to display the information about the sockets in the
current system.
Example
# Display the information about the socket of TCP type.
<Quidway> display ip socket socktype 1
SOCK_STREAM:
Task = VTYD(18), socketid = 1, Proto = 6,
LA = 0.0.0.0:23, FA = 0.0.0.0:0,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_ACCEPTCONN SO_KEEPALIVE SO_SENDVPNID SO_SETKEEPALIVE,
socket state = SS_PRIV SS_ASYNC
Task = VTYD(18), socketid = 2, Proto = 6,
LA = 10.153.17.99:23, FA = 10.153.17.56:1161,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_KEEPALIVE SO_OOBINLINE SO_SENDVPNID SO_SETKEEPALIVE,
socket state = SS_ISCONNECTED SS_PRIV SS_ASYNC
Task = VTYD(18), socketid = 3, Proto = 6,
LA = 10.153.17.99:23, FA = 10.153.17.82:1121,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_KEEPALIVE SO_OOBINLINE SO_SENDVPNID SO_SETKEEPALIVE,
To Next Page
Loading...
