Huawei Quidway S8500 Series - Pim Neighbor-Limit; Pim Neighbor-Policy

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-16
[Quidway-Vlan-interface10] pim dm
5.1.16 pim neighbor-limit
Syntax
pim neighbor-limit limit
undo pim neighbor-limit
View
VLAN interface view
Parameter
limit: Limits of PIM neighbors on the interface, in the range of 0~128.
Description
Use the pim neighbor-limit command to limit the PIM neighbors on an interface. No
neighbor can be added any more when the limit is reached.
Use the undo pim neighbor-limit command to restore the default setting.
By default, the PIM neighbors on the interface are limited to 128.
If the existing PIM neighbors exceed the configured value during configuration, they will
not be deleted.
Example
# Limit the PIM neighbors on the Vlan-interface10 to 50.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway]interface vlan-interface 10
[Quidway-Vlan-interface10] pim neighbor-limit 50
5.1.17 pim neighbor-policy
Syntax
pim neighbor-policy acl-number
undo pim neighbor-policy
View
VLAN interface view
Parameter
acl-number: Basic ACL number, in the range of 2000 to 2999.