Huawei Quidway S8500 Series - Info-Center Loghost Source; Info-Center Monitor Channel

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-45
4.6.12 info-center loghost source
Syntax
info-center loghost source interface-type interface-number
undo info-center loghost source
View
System view
Parameter
interface-type interface-number: Layer 3 interface on the switch.
Description
Use the command to Using info-center loghost source command, you can set source
address of the packets sent to loghost as the address of the interface specified by the
interface-name.
Use the command to Using undo info-center loghost source command, you can
cancel the setting source address of the packets sent to loghost.
Related command: info-center enable, display info-center.
Example
# Set source address of the packets sent to loghost as the address of the VLAN
interface 1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center loghost source vlan-interface 1
4.6.13 info-center monitor channel
Syntax
info-center monitor channel { channel-number | channel-name }
undo info-center monitor channel
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, the system has ten
channels.