Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
Chapter 7 MBGP Multicast Extension
Configuration Commands
Huawei Technologies Proprietary
7-19
Description
Use the peer filter-policy export command to configure the peer group to apply the
ACL-based filter policy to the advertised routes. Use the undo peer filter-policy
export command to cancel the existing configuration.
By default, no ACL-based filter policy is configured.
The peer filter-policy export command can only be configured on peer groups.
Related command: peer filter-policy import, acl .
Example
# Configure the peer group test to use ACL 2000 to filter the advertised routes.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] bgp 100
[Quidway-bgp] ipv4-family multicast
[Quidway-bgp-af-mul] peer test filter-policy 2000 export
7.1.28 peer filter-policy import
Syntax
peer { group-name | peer-address } filter-policy acl-number import
undo peer { group-name | peer-address } filter-policy acl-number import
View
IPv4 multicast sub-address family view
Parameter
group-name: Specifies the name of the peer group.
peer-address: Specifies the IP address of the peer.
acl-number: Specifies an IP acl number, ranging from 2000 to 3999. That is, you can
use basic ACLs or advanced ACLs.
Description
Use the peer filter-policy import command to configure the peer to apply the
ACL-based filter policy to the received routes. Use the undo peer filter-policy import
command to cancel the existing configuration.
By default, no ACL-based filter policy is configured.
Related command: peer filter-policy export, acl.
The inbound filter policy configured for the peer takes precedence over the
configurations for the peer group.
To Next Page
Loading...
