Huawei Quidway S8500 Series User Manual

Command Manual – PoE
Quidway S8500 Series Routing Switches Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-4
Hardware Version :000
CPLD Version :021
Table 1-2 Description on the fields of the display poe pse command
Field Description
Power Current Value Current power of the card
Power Remaining Value Remaining power of the card
Power Max Value Maximum power of the card
Power Peak Value Peak power of the card
Power Average Value Average power of the card
Software Version PSE software version
Hardware Version PSE hardware version
 Note:
The sampling cycle of the current power of the interface card is 1 minute, and the
sampling cycle of the peak power and average power is 5 minutes.
1.1.4 display poe slot
Syntax
display poe slot slotnum
View
Any view
Parameter
slotnum: Slot number of a PoE card
Description
Use the display poe slot slotnum command to display the information of a PoE card in
the switch.
Example
# Display the information of the PoE card in slot 8 of the switch.
[8508] display poe slot 8
PSE Information of board 8:
Power Current Value :33 W

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English