Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-9
Example
# Display the Hybrid ports in the current system.
<Quidway> display port hybrid
The following hybrid ports exist:
Ethernet2/1/1 Ethernet2/1/2
The above information displays that the current system has two Hybrid ports,
Ethernet2/1/1 and Ethernet2/1/2.
1.1.8 duplex
Syntax
duplex { auto | full | half }
undo duplex
View
Ethernet port view
Parameter
auto: Port auto-negotiation attribute.
full: Port full-duplex attribute.
half: Port half-duplex attribute.
Description
Use the duplex command to configure the duplex attribute of the Ethernet port.
Use the undo duplex command to restore the duplex attribute of the port to default
auto-negotiation mode.
By default, the duplex attribute is auto.
Related command: speed.
Example
# Configure the Ethernet port Ethernet2/1/1 as auto-negotiation attribute.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet 2/1/1
[Quidway-Ethernet2/1/1] duplex auto

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English