Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 3 Multicast Common Configuration Commands
Huawei Technologies Proprietary
3-12
undo local-user [ domain domain-name ] ip-address
View
System view
Parameter
ip-address: IP address of the multicast group.
mask-length: Mask length of the multicast group.
domain domain-name: Domain name of the multicast group.
Description
Use the local-user multicast command to specify the multicast group(s) that users in
a specified domain can join.
Use the undo local-user multicast command to cancel the configuration.
Related command: display local-user, service-type lan-access, multicast.
Example
# Grant users permission to join the multicast group with the IP address of
225.10.10.10.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] local-user multicast 225.10.10.10.
3.1.11 multicast
Syntax
multicast ip-address [ ip-address &<1-9> | mask-length ]
undo multicast { ip-address [ ip-address &<1-9> ] | all }
View
Local user view
Parameter
ip-address &<1-9>: Multicast group IP address. &<1-9> implies that the preceding
parameter can repeatedly input up to 9 times.
mask-length: Mask length. The default value of this argument is to 32. If you do not
specify this argument, this command specifies a specific multicast group instead of a
network segment.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English