Huawei Quidway S8500 Series User Manual

Command Manual – STP
Quidway S8500 Series Routing Switches Chapter 1
MSTP Configuration Commands
Huawei Technologies Proprietary
1-11
Related command: display stp.
Example
# Clear the statistics information on the ports from Ethernet2/1/1 through Ethernet2/1/3
<Quidway> reset stp interface Ethernet 2/1/1 to Ethernet 2/1/3
1.1.10 revision-level
Syntax
revision-level level
undo revision-level
View
MST region view
Parameter
level: Specifies the MSTP revision level, ranging from 0 to 65535. By default, MSTP
revision level takes 0.
Description
Use the revision-level command to configure MSTP revision level of the switch.
Use the undo revision-level command to restore the default revision level.
MSTP revision level, together with region name and VLAN mapping table, is used for
determining the MST region to which the switch belongs.
Related command: instance, region-name, check region-configuration,
vlan-mapping modulo and active region-configuration.
Example
# Set the MSTP revision level of the switch MST region to 5.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway]stp region-configuration
[Quidway-mst-region] revision-level 5
1.1.11 stp
Syntax
stp { enable | disable }
undo stp

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English