Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-47
route-policy-name: The specified Route-policy.
Description
Use the peer route-policy import command to assign the Route-policy to the route
coming from the peer/peer group.
Use the undo peer route-policy import command to delete the specified
Route-policy.
By default, the peer/peer group has no Route-policy association.
The priority of the inbound filter policy configured for the peer is higher than that
configured for the peer group.
Related command: peer route-policy export.
Example
# Apply the Route-policy named test-policy to the route coming from the peer group
test.
[Quidway-bgp] peer test route-policy test-policy import
5.1.55 peer route-update-interval
Syntax
peer group-name route-update-interval seconds
undo peer group-name route-update-interval
View
BGP view
Parameter
group-name: Specifies the name of the configured peer group.
seconds: The minimum interval of sending route update message. The range is from 0
to 600 seconds. By default, the advertisement interval is 5 seconds for internal
peer/peer group, and 30 seconds for external peer/peer group.
Description
Use the peer route-update-interval command to configure the interval for the
transmission route of a peer group.
Use the undo peer route-update-interval command to restore the interval to the
default value.
To Next Page
Loading...
Need help?
General