Huawei Quidway S8500 Series - Display Qos-Interface Traffic-Statistic; Display Qos-Vlan All

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-11
2.1.13 display qos-interface traffic-statistic
Syntax
display qos-interface [ interface-type interface-number ] traffic-statistic
View
Any view
Parameter
interface-type interface-number: Port of the switch, for detailed description, please
refer to Command Manual – Port.
Description
Use the display qos-interface traffic-statistic command to view traffic statistics of a
port, including the target ACL, number of calculated packets etc.
Related command: traffic-statistics.
Example
# Display traffic statistics information on port GigabitEthernet7/1/1..
<Quidway> display qos-interface GigabitEthernet7/1/1 traffic-statistic
GigabitEthernet7/1/1: traffic-statistic
Inbound:
Matches: Acl 2000 rule 0 running
12002688 bytes (green 1270244416 byte(s), yellow 1895874880 byte(s), red
704683968 byte(s) )
3333270 packets (green 0 byte(s), yellow 0 byte(s), red 0 byte(s) )
2.1.14 display qos-vlan all
Syntax
display qos-vlan [ vlan-id ] all
View
Any view
Parameter
vlan-id: ID of a VLAN, in the range of 1 to 4094.
Description
Use the display qos-vlan all command to display the QoS configuration (including the
configuration of priority marking, traffic policing, and traffic redirection) information