Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 4 IGMP Configuration Commands
Huawei Technologies Proprietary
4-12
4.1.12 igmp robust-count
Syntax
igmp robust-count robust-value
undo igmp robust-count
View
VLAN interface view
Parameter
robust-value: IGMP robust value, number of times the IGMP query router sends IGMP
group query message after it receives the IGMP Leave message from the host. the
value range is 2 to 5. The default value is 2.
Description
Use the igmp robust-count command to set the number of times the IGMP query
router sends IGMP group query message after it receives the IGMP Leave message
from the host.
Use the undo igmp robust-count command to restore the default value.
Related commands: igmp lastmember-queryinterval, display igmp interface.
Example
# Set the robust value at the Vlan-interface 10 as 3.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway]interface vlan-interface 10
[Quidway-Vlan-interface10] igmp robust-count 3
4.1.13 igmp timer other-querier-present
Syntax
igmp timer other-querier-present seconds
undo igmp timer other-querier-present
View
VLAN interface view
Parameter
seconds: IGMP querier present timer value in second ranging from 1 to 131070. By
default, the value is twice the value of IGMP query message interval, i.e., 120 seconds.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English