Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 5 SNMP Configuration Commands
Huawei Technologies Proprietary
5-12
Example
# Create an SNMP group named test.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] snmp-agent group v3 test.
5.1.11 snmp-agent local-engineid
Syntax
snmp-agent local-engineid engineid
undo snmp-agent local-engineid
View
System view
Parameter
engineid: Specifies the engine ID with a character string, only composed of
hexadecimal numbers between 5 and 32 including.
Description
Use the snmp-agent local-engineid command to configure a name for a local or
remote SNMP engine on the Ethernet Switch.
Use the command to Using undo snmp-agent local-engineid command, you can
restore the default setting of engine ID.
By default, the engine ID is corporation number + device information. Device
information is determined according to different products. It can be IP address, MAC
address or user defined text. However, you must use numbers in hexadecimal form.
Example
# Configure the ID of a local or remote device as 1234512345.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] snmp-agent local-engineid 1234512345
5.1.12 snmp-agent mib-view
Syntax
snmp-agent mib-view { included | excluded } view-name oid-tree
undo snmp-agent mib-view view-name

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English