Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-29
Description
Use the display diagnostic-information command to view the current configuration
information about all running modules. You can use all these information to help
diagnose and troubleshoot the Ethernet switch.
When the Ethernet switch does not run well, you can collect all sorts of information
about the switch to locate the source of fault. However, each module has its
corresponding display command, which make it difficult for you to collect all the
information needed. In this case, you can use display diagnostic-information
command.
Example
# Display all system configuration information.
<Quidway> display diagnostic-information
This operation may take a few minutes, continue?[Y/N]y
-------------------- display version --------------------
Huawei-3Com Versatile Routing Platform Software
VRP(R) Software, Version COMWAREHZV300R001B08D018, Release 0001
VRP(tm) Lanswitch Platform Software Version COMWAREHZV300R001B08D018
S8500 Software Version V100R002B02D018
S8500 Product Version S8500-VRP310-r1266
Copyright (c) 2003-2005 Hangzhou Huawei-3Com Tech. Co.,Ltd. All rights
reserved.
Copyright (c) 2000-2003 Huawei Tech. Co.,Ltd. All rights reserved.
Compiled Sep 29 2005 03:43:00, RELEASE SOFTWARE
Quidway S8500 uptime is 0 week, 2 days, 5 hours, 31 minutes
This device is Quidway S8505
………
4.5 Network Connection Test Commands
4.5.1 ping
Syntax
ping [ ip ] [ -a ip-address | -c count | -d | - f | -h ttl | -i interface-type interface-number | -n
| - p pattern | -q | -r | -s packetsize | -t timeout | -tos tos | -v | -vpn-instance
vpn-instance-name ]* host
View
Any view
To Next Page
Loading...
