Huawei Quidway S8500 Series - Chapter 2 ARP Configuration Commands; ARP Configuration Commands; Arp Proxy Enable; Arp Static

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 2 ARP Configuration Commands
Huawei Technologies Proprietary
2-1
Chapter 2 ARP Configuration Commands
2.1 ARP Configuration Commands
2.1.1 arp proxy enable
Syntax
arp proxy enable
undo arp proxy enable
View
VLAN view
Parameter
None
Description
Use the arp proxy enable command to enable ARP proxy function.
Use the undo arp proxy enable command to disable ARP proxy function.
By default, ARP proxy function is disabled.
You can configure these commands for a VLAN and sub-VLAN. If you enable ARP
proxy for a VLAN, the device with ARP proxy function directly forwards received ARP
requests in the VLAN. If you enable ARP proxy for a sub-VLAN, the device with ARP
proxy function directly forwards received ARP requests in other sub-VLANs which
belong to the same super-VLAN and also have the ARP proxy function enabled.
Related command: display arp proxy.
Example
# Enable ARP proxy function for VLAN 2.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] vlan 2
[Quidway-vlan2] arp proxy enable
2.1.2 arp static
Syntax