Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 6 MSDP Configuration Commands
Huawei Technologies Proprietary
6-18
6.1.22 shutdown
Syntax
shutdown peer-address
undo shutdown peer-address
View
MSDP view
Parameter
peer-address: IP address of MSDP peer.
Description
Use the shutdown command to disable the MSDP peer specified.
Use the undo shutdown command to remove the configuration.
By default, no MSDP peer is disabled.
Related command: peer.
Example
# Disable the MSDP peer 125.10.7.6.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] msdp
[Quidway-msdp] shutdown 125.10.7.6
6.1.23 static-rpf-peer
Syntax
static-rpf-peer peer-address [ rp-policy ip-prefix-name ]
undo static-rpf-peer peer-address
View
MSDP view
Parameter
peer-address: Address of the static RPF peer to receive SA messages.
rp-policy ip-prefix-name: Filter policy based on RP address, which filters the RP in SA
messages. If the parameter is not specified, all SA messages from static RPF peer will
be accepted. If the parameter rp-policy ip-prefix-name is specified and filter policy is
configured, the router will only accept SA messages from the RP which passes filtering.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English