Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-23
Forwarding Address: 0.0.0.0
Tag: 1
Table 3-8 Description of the fields of the display ospf lsdb ase command
Field Description
type Type of the LSA
ls id Link state ID of the LSA
adv rtr Router ID of the router originating the LSA
ls age Age of the LSA in seconds
len Length of the LSA
seq# Sequence number of the LSA
chksum Checksum of the LSA
Options Options of the LSA
Net mask Network mask
E type Type of external route
Forwarding Address Forwarding address
Tag Tag
3.1.21 display ospf nexthop
Syntax
display ospf [ process-id ] nexthop
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf nexthop command to view the information about the next-hop.
Example
# Display the OSPF next-hop information.
<Quidway> display ospf nexthop
OSPF Process 1 with Router ID 1.1.1.1