Huawei Quidway S8500 Series - Page 342

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-22
SNet 10.153.18.0 1.1.1.1 355 28 80000003 10 Inter List
Area: 0.0.0.1
Type LinkState ID AdvRouter Age Len Sequence Metric Where
Rtr 1.1.1.1 1.1.1.1 449 36 80000004 0 SpfTree
Rtr 3.3.3.3 3.3.3.3 429 36 8000000a 0 Clist
Net 10.153.18.89 3.3.3.3 429 32 80000003 0 SpfTree
SNet 10.153.17.0 1.1.1.1 355 28 80000003 10 Inter List
ASB 2.2.2.2 1.1.1.1 355 28 80000003 10 SumAsb List
AS External Database:
Type LinkState ID AdvRouter Age Len Sequence Metric Where
ASE 10.153.18.0 1.1.1.1 1006 36 80000002 1 Ase List
ASE 10.153.16.0 2.2.2.2 798 36 80000002 1 Uninitialized
ASE 10.153.17.0 2.2.2.2 623 36 80000003 1 Uninitialized
ASE 10.153.17.0 1.1.1.1 1188 36 80000002 1 Ase List
Table 3-7 Description of the fields of the display ospf lsdb command
Field Description
Type Type of the LSA
LinkStateID Link state ID of the LSA
AdvRouter Router ID of the router originating the LSA
Age Age of the LSA, in seconds
Len Length of the LSA
Sequence Sequence number of the LSA
Metric Cost from the router originating the LSA to the LSA destination
Where Location of the LSA
<Quidway> display ospf lsdb ase
OSPF Process 1 with Router ID 1.1.1.1
Link State Data Base
type : ASE
ls id : 2.2.0.0
adv rtr: 1.1.1.1
ls age: 349
len: 36
seq#: 80000001
chksum: 0xfcaf
Options: (DC)
Net mask:255.255.0.0
Tos 0 metric: 1
E type : 2