Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-50
3.1.51 silent-interface
Syntax
silent-interface { default | Vlan-interface Vlan-interface-number }
undo silent-interface { default | Vlan-interface Vlan-interface-number }
View
OSPF view
Parameter
Vlan-interface: Specifies the VLAN interface
Vlan-interface-number: Specifies the VALAN interface number.
default: All interfaces.
Description
Use the silent-interface command to disable an interface to transmit OSPF packets.
Use the undo silent-interface command to restore the default setting.
By default, the interface is enabled to transmit OSPF packets.
You can use this command to disable an interface to transmit OSPF packets, so as to
prevent the router on some network from receiving the OSPF routing information. On a
switch, this command can disable/enable a VLAN interface to send OSPF packets.
Example
# Disable interface Vlan-interface 20 to transmit OSPF packets.
[Quidway-ospf-1] silent-interface Vlan-interface 20
# Disable all ports form sending OSPF packets.
[Quidway-ospf-1] silent-interface default
3.1.52 sham-link
Syntax
sham-link source-ip destination-ip dead minimal multi-hello packets
undo sham-link source-ip destination-ip
View
OSPF area view
Parameter
sham-link: Sham-link link.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English