Huawei Quidway S8500 Series User Manual

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 4 DHCP Configuration Commands
Huawei Technologies Proprietary
4-3
[Quidway] interface vlan-interface 1
[Quidway-Vlan-interface1] dhcp select global
4.1.3 dhcp server detect
Syntax
dhcp server detect
undo dhcp server detect
View
System view
Parameter
None
Description
Use the dhcp server detect command to enable fake DHCP server detection.
Use the undo dhcp server detect command to disable fake DHCP server detection.
Fake DHCP server detection is disabled by default.
Example
# Enable fake DHCP server detection.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] dhcp server detect
4.2 DHCP Server Configuration Commands
4.2.1 debugging dhcp server
Syntax
debugging dhcp server { all | error | event | packet }
undo debugging dhcp server { all | error | event | packet }
View
User view
Parameter
all: Used to enable/disable all types of debugging for DHCP server.
error: Used to enable/disable error debugging for DHCP server errors, including those
occur when a DHCP server processes DHCP packets or assigns IP addresses.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English