Huawei Quidway S8500 Series User Manual

Command Manual – VLAN&QinQ
Quidway S8500 Series Routing Switches Chapter 2
GARP/GVRP Configuration Commands
Huawei Technologies Proprietary
2-7
undo gvrp
View
System view/Ethernet port view
Parameter
None
Description
Use the gvrp command to enable GVRP.
Use the undo gvrp command to disable GVRP.
By default, GVRP is disabled.
This command can be used to enable/disable global GVRP in system view or
enable/disable port GVRP in Ethernet port view.
Before enabling port GVRP, you must enable global GVRP first. In addition, port GVRP
must be enabled/disabled on Trunk ports.
Related command: display gvrp status.
Example
# Enable global GVRP.
[Quidway] gvrp
2.2.4 gvrp registration
Syntax
gvrp registration { fixed | forbidden | normal }
undo gvrp registration
View
Ethernet port view
Parameter
fixed: Enables to create or register VLAN on the port manually and disables to register
or deregister VLAN dynamically.
forbidden: Deregisters all VLANs except VLAN 1 and disables to create or register any
other VLAN on the port.
normal: Enables to create, register and deregister VLAN on the port manually or
dynamically.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English