Command Manual – VLAN&QinQ
Quidway S8500 Series Routing Switches Chapter 2
GARP/GVRP Configuration Commands
Huawei Technologies Proprietary
2-8
Description
Use the gvrp registration command to configure GVRP registration type.
Use the undo gvrp registration command to restore the default type.
By default, the registration type is normal.
This command can be only used on Trunk port.
Related command: display gvrp statistics.
Example
# Set the GVRP registration type of Ethernet2/1/1 as fixed.
[Quidway-Ethernet2/1/1] gvrp registration fixed
To Next Page
Loading...
