Huawei Quidway S8500 Series - Debugging Bgp

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-8
Related command: reset dampening, reset bgp flap-info, display bgp
routing-table dampened, display bgp routing-table flap-info.
Example
# Modify the BGP route dampening parameters.
[Quidway-bgp] dampening 15 15 1000 2000 10000
5.1.9 debugging bgp
Syntax
debugging bgp { all | event | normal | { keepalive | mp-update | open | packet |
route-refresh | update } [ receive | send ] [ verbose ] }
undo debugging bgp { all | event | normal | keepalive | mp-update | open | packet |
route-refresh | update }
View
User view
Parameter
all: Indicates to enable all BGP information debugging.
event: Indicates to enable BGP event information debugging.
normal: Indicates to enable information debugging of BGP normal functions.
keepalive: Indicates to enable BGP Keepalive packet information debugging.
mp-update: Indicates to enable MBGP Update packet information debugging.
open: Indicates to enable BGP Open packet information debugging.
packet: Indicates to enable BGP packet information debugging.
route-refresh: Indicates to enable BGP route-refresh packet information debugging.
update: Indicates to enable BGP Update packet information debugging.
receive: Information of received packets.
send: Information of sent packets.
verbose: Detailed information.
Description
Use the debugging bgp all command to enable all the information debugging of BGP
packet and events.
Use the debugging bgp event command to enable the information debugging of BGP
events