Huawei Quidway S8500 Series - Display Ospf Error

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-17
Field Description
Router Number of all Router LSAs
SumNet Number of all Sumnet LSAs
SumASB Number of all SumASB LSAs
Neighbors Number of neighbors in this area
Interfaces Number of interfaces in this area
Spf Number of SPF computation count in this area
Area
rtr, net, sumasb,
sumnet
Number of all LSAs in this area
Intra Area Number of intra-area routes
Inter Area Number of inter-area routes
Routing Table
ASE Number of external routes
3.1.18 display ospf error
Syntax
display ospf [ process-id ] error
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf error command to view the OSPF error information.
Example
# Display the OSPF error information.
<Quidway> display ospf error
OSPF Process 1 with Router ID 1.1.1.1
OSPF packet error statistics:
0: IP: received my own packet 0: OSPF: wrong packet type
0: OSPF: wrong version 0: OSPF: wrong checksum
0: OSPF: wrong area id 0: OSPF: area mismatch
0: OSPF: wrong virtual link 0: OSPF: wrong authentication type
0: OSPF: wrong authentication key 0: OSPF: too small packet