Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-26
<Quidway> display radius
------------------------------------------------------------------
SchemeName =system Index=0 Type=huawei
Primary Auth IP =127.0.0.1 Port=1645 State=active
Primary Acct IP =127.0.0.1 Port=1646 State=active
Second Auth IP =0.0.0.0 Port=1812 State=block
Second Acct IP =0.0.0.0 Port=1813 State=block
Auth Server Encryption Key= huawei
Acct Server Encryption Key= huawei
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts =5
Retry sending times of noresponse acct-stop-PKT =500
Username format =without-domain
Data flow unit =Byte
Packet unit =1
------------------------------------------------------------------
Total 1 RADIUS scheme(s). 1 listed
Table 2-2 Description of output information of the display radius command
Field Description
SchemeName The name of Radius Scheme
Index The index of Radius Scheme
Type The type of Radius Scheme
Primary Auth IP/ Port/ State
The IP address of the primary authentication
server/the number of the access port/the current
state of the server
Primary Acct IP/ Port/ State
The IP address of the primary accounting server/the
number of the access port/the current state of the
server
Second Auth IP/ Port/ State
The IP address of the secondary authentication
server/the number of the access port/the current
state of the server
Second Acct IP/ Port/ State
The IP address of the secondary accounting
server/the number of the access port/the current
state of the server
Auth Server Encryption Key The login password of the authentication server
Acct Server Encryption Key The login password of the accounting server
TimeOutValue (seconds) Response timeout value of the RADIUS server
Retry Times
The maximum transmitting times of RADIUS
request packet.
To Next Page
Loading...
Need help?
General