Huawei Quidway S8500 Series - Page 914

Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-28
View
Any view
Parameter
None
Description
Use the display radius statistics command to view the statistics information of
RADIUS packet.
The displayed packet information can help with RADIUS diagnosis and
troubleshooting.
Related command: radius scheme.
Example
# Display the statistics information of RADIUS packets.
<Quidway> display radius statistics
state statistic(total=4120):
DEAD=4120 AuthProc=0 AuthSucc=0
AcctStart=0 RLTSend=0 RLTWait=0
AcctStop=0 OnLine=0 Stop=0
StateErr=0
Receive and Send packets statistic:
Send PKT total :0 Receive PKT total:0
RADIUS received packets statistic:
Code= 2,Num=0 ,Err=0
Code= 3,Num=0 ,Err=0
Code= 5,Num=0 ,Err=0
Code=11,Num=0 ,Err=0
Code=22,Num=0 ,Err=0
Running statistic:
RADIUS received messages statistic:
Normal auth request ,Num=0 ,Err=0 ,Succ=0
EAP auth request ,Num=0 ,Err=0 ,Succ=0
Account request ,Num=0 ,Err=0 ,Succ=0
Account off request ,Num=0 ,Err=0 ,Succ=0
Leaving request ,Num=0 ,Err=0 ,Succ=0
PKT auth timeout ,Num=0 ,Err=0 ,Succ=0
PKT acct_timeout ,Num=0 ,Err=0 ,Succ=0
Realtime Account ,Num=2317 ,Err=0 ,Succ=2317